LM1458/LM1558
Dual Operational Amplifier
General Description
The LM1458 and the LM1558 are general purpose dual op-
erational amplifiers. The two amplifiers share a common bias
network and power supply leads. Otherwise, their operation
is completely independent.
The LM1458 is identical to the LM1558 except that the
LM1458 has its specifications guaranteed over the tempera-
ture range from 0˚C to +70˚C instead of −55˚C to +125˚C.
Features
n
No frequency compensation required
n
Short-circuit protection
n
Wide common-mode and differential voltage ranges
n
Low-power consumption
n
8-lead can and 8-lead mini DIP
n
No latch up when input common mode range is
exceeded
Connection Diagrams
Metal Can Package
DS007886-2
Top View
Order Number LM1558H,
LM1558H/883 or LM1458H
See NS Package Number H08C
Dual-In-Line Package
DS007886-3
Top View
Order Number LM1558J/883, LM1458M,
LM1458MX or LM1458N
See NS Package Number J08A, M08A or N08E
August 2000
LM1458/LM1558
Dual
Operational
Amplifier
© 2000 National Semiconductor Corporation
DS007886
www.national.com
Absolute Maximum Ratings
(Note 1)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
(Note 5)
Supply Voltage
LM1558
±
22V
LM1458
±
18V
Power Dissipation (Note 2)
LM1558H/LM1458H
500 mW
LM1458N
400 mW
Differential Input Voltage
±
30V
Input Voltage (Note 3)
±
15V
Output Short-Circuit Duration
Continuous
Operating Temperature Range
LM1558
LM1458
−55˚C to +125˚C
0˚C to +70˚C
Storage Temperature Range
−65˚C to +150˚C
Lead Temperature (Soldering, 10 sec.)
260˚C
Soldering Information
Dual-In-Line Package
Soldering (10 seconds)
260˚C
Small Outline Package
Vapor Phase (60 seconds)
215˚C
Infrared (15 seconds)
220˚C
See AN-450 “Surface Mounting Methods and Their Effect
on Product Reliability” for other methods of soldering
surface mount devices.
ESD tolerance (Note 6)
300V
Electrical Characteristics
(Note 4)
Parameter
Conditions
LM1558
LM1458
Units
Min
Typ
Max
Min
Typ
Max
Input Offset Voltage
T
A
= 25˚C, R
S
≤
10 k
Ω
1.0
5.0
1.0
6.0
mV
Input Offset Current
T
A
= 25˚C
80
200
80
200
nA
Input Bias Current
T
A
= 25˚C
200
500
200
500
nA
Input Resistance
T
A
= 25˚C
0.3
1.0
0.3
1.0
M
Ω
Supply Current Both
T
A
= 25˚C, V
S
=
±
15V
3.0
5.0
3.0
5.6
mA
Amplifiers
Large Signal Voltage Gain
T
A
= 25˚C, V
S
=
±
15V
50
160
20
160
V/mV
V
OUT
=
±
10V, R
L
≥
2 k
Ω
Input Offset Voltage
R
S
≤
10 k
Ω
6.0
7.5
mV
Input Offset Current
500
300
nA
Input Bias Current
1.5
0.8
µA
Large Signal Voltage Gain
V
S
=
±
15V, V
OUT
=
±
10V
25
15
V/mV
R
L
≥
k
Ω
Output Voltage Swing
V
S
=
±
15V, R
L
= 10 k
Ω
±
12
±
14
±
12
±
14
V
R
L
= 2 k
Ω
±
10
±
13
±
10
±
13
V
Input Voltage Range
V
S
=
±
15V
±
12
±
12
V
Common Mode
R
S
≤
10 k
Ω
70
90
70
90
dB
Rejection Ratio
Supply Voltage
R
S
≤
10 k
Ω
77
96
77
96
dB
Rejection Ratio
Note 1: “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is
functional, but do not guarantee specific performance limits.
Note 2: The maximum junction temperature of the LM1558 is 150˚C, while that of the LM1458 is 100˚C. For operating at elevated temperatures, devices in the H08
package must be derated based on a thermal resistance of 150˚C/W, junction to ambient or 20˚C/W, junction to case. For the DIP the device must be derated based
on a thermal resistance of 187˚C/W, junction to ambient.
Note 3: For supply voltages less than
±
15V, the absolute maximum input voltage is equal to the supply voltage.
Note 4: These specifications apply for V
S
=
±
15V and −55˚C
≤
T
A
≤
125˚C, unless otherwise specified. With the LM1458, however, all specifications are limited to
0˚C
≤
T
A
≤
70˚C and V
S
=
±
15V.
Note 5: Refer to RETS 1558V for LM1558J and LM1558H military specifications.
Note 6: Human body model, 1.5 k
Ω
in series with 100 pF.
LM1458/LM1558
www.national.com
2
Schematic Diagram
DS007886-1
Numbers in parentheses are pin numbers for amplifier B.
LM1458/LM1558
www.national.com
3
Physical Dimensions
inches (millimeters) unless otherwise noted
Metal Can Package (H)
Order Number LM1558H, LM1558H/883 or LM1458H
NS Package Number H08C
Small Outline Package (M)
Order Number LM1458M or LM1458MX
NS Package Number M08A
LM1458/LM1558
www.national.com
4
Physical Dimensions
inches (millimeters) unless otherwise noted (Continued)
Small Outline Package (M)
Order Number LM1458M or LM1458MX
NS Package Number M08A
Molded Dual-In-Line Package (N)
Order Number LM1458N
NS Package Number N08E
LM1458/LM1558
www.national.com
5
Notes
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and
whose failure to perform when properly used in
accordance with instructions for use provided in the
labeling, can be reasonably expected to result in a
significant injury to the user.
2. A critical component is any component of a life
support device or system whose failure to perform
can be reasonably expected to cause the failure of
the life support device or system, or to affect its
safety or effectiveness.
National Semiconductor
Corporation
Americas
Tel: 1-800-272-9959
Fax: 1-800-737-7018
Email: support@nsc.com
National Semiconductor
Europe
Fax: +49 (0) 180-530 85 86
Email: europe.support@nsc.com
Deutsch Tel: +49 (0) 69 9508 6208
English
Tel: +44 (0) 870 24 0 2171
Français Tel: +33 (0) 1 41 91 8790
National Semiconductor
Asia Pacific Customer
Response Group
Tel: 65-2544466
Fax: 65-2504466
Email: ap.support@nsc.com
National Semiconductor
Japan Ltd.
Tel: 81-3-5639-7560
Fax: 81-3-5639-7507
www.national.com
LM1458/LM1558
Dual
Operational
Amplifier
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.